Pressure Transmitter

Product Center

The pressure transmitter applies the principle of diffusion silicon measurement to measure the gauge pressure and absolute pressure of liquids and gases, and converts the measured values into electronic signals for output. Through good seismic resistance, sturdy casing, and high protection level, it can meet the requirements of industrial use to the greatest extent possible.

-Pneumatic system

-Hydroelectric system

-Industrial applications

-Machine and equipment manufacturing

-Automatic control system

Product Display

Product Introduction

This product applies the principle of diffusion silicon measurement to measure the gauge pressure and absolute pressure of liquids and gases, and converts the measured values into electronic signals for output. Through good seismic resistance, sturdy casing, and high protection level, it can meet the requirements of industrial use to the greatest extent possible.

Product Accuracy

Product Features

-Relative/Absolute Pressure Measurement

-Output standard signal of 4 20mA, 0 5V

-High stability, high reliability, and minimal drift

-All stainless steel welded structure

-Anti vibration, anti impact, anti electromagnetic interference

-Economy, small size, light weight

Product Data Sheet

Range of measurement	-100kPa….0~35kPa….60MPa
Pressure type	Gauge pressure, absolute pressure, sealing pressure
Accuracy	0.5% FS (@ 25 ± 5 ℃) (customizable up to 0.3% FS)
Delay	0.1%FS
Repeatability	0.1%FS
Temperature drift	35kPa:士2%FS(0℃~60℃) Other: 1.5% FS (-20 ℃~85 ℃)
Response time	<90ms (up to 90% FS) i
Overload pressure	Reference Range Selection Table
Service life	>1000000 pressure cycle
Ambient temperature	-20℃-85℃
Medium temperature	-30℃~105℃
Storage temperature	-40℃~125℃
EMC	Immunity: IEC 61000-6-2, Radiation: IEC 61000-6-3
insulation resistance	>100M2/500VDC(200M 2/250VDC)
Vibration performance	Sinusoidal curve: 20g, 25Hz~2kz; IEC 60068-2-6 Random: 7.5grms, 5Hz~1kHz; IEC 60068-2-64
Impact resistance	Impact: 200g/1ms; IEC 60068-2-27 Free fall: 1m; IEC 60068-2-32
Protection grade	IP651
Media compatibility	Various media compatible with 3I6L stainless steel
Six parties	HEX24
Net weight	120~150g