Cable Thermocouple - Beijing Primte Technology Co., Ltd

Product Center

Cable Thermocouple

This product has a variety of categories and can be used in various working environments and complex installation conditions. Most of them have simple and compact structures, are easy to install, and are relatively inexpensive.

-Diversified product categories

-Widely used

-Low cost, good measurement accuracy

Product Display

Product Introduction

This product is used in various occasions, such as HVAC, refrigeration units, heating devices, ovens, furnaces, equipment manufacturing, automobiles, bearings, pipelines, and containers. The product usually measures within the range of -50... 350 ℃ and can be protected with anti bending protection to protect cables.

Product Accuracy

Thermocouple accuracy

Temperature measuring element	Class 1	Measuring range	Class 2	Measuring range
TCu-CuNi	0.5℃ or (0.4% x\|T\|)℃	-40..+350℃	1℃ or (0.75% x\|T\|)℃	-40..+350℃
JFe-CuNi KNiCr-Ni ENiCr-CuNi NNiCrSi-NiSi	1.5℃ or (0.4% x\|T\|)℃	-40..+750℃ -40..+1200°C -40..+900°C -40..+1200℃	2.5℃ or (0.75% x\|T\|)℃	-40..+750℃ -40..+1200°C -40..+900°C -40..+1200℃
S PtRh10-Pt R PtRh13-Pt	1.0℃ or 0.3% x(\|t\|-1100) ℃	0..+1600℃ 0..+1600℃	1.5℃ or (0.25% x\|T\|)℃	0..+1600℃ 0..+1600℃
BPtRh30-PtRh6	——	0..+1700°C	1.5℃ or (0.25% x\|T\|)℃	0..+1700℃

Thermocouple connection method

Connecting cables

Wire rod:	Compensate the wire to match the thermocouple graduation number
Wire cross-section:	Approximately 0.22 mm (standard model), customizable
Number of wires:	It depends on the number of cores in the thermocouple
Insulation material:	PVC、 Silicone, FEP, PTFE, PFA or fiberglass
Note: Wires can be customized according to customer requirements

The maximum temperature that can be reached at any point of the connecting cable is the temperature specified for the connecting cable. The sensor itself may withstand higher temperatures. For common connecting wires, the following temperature limits apply: